30A Pulse Sparkle Gold Silver Platinum Jewelry Spot Welding Machine

Installation:

1. Electrode holder connected to the output negative electrode holder connected to the positive output.
2. Can be sharpened tungsten needles on the grinding machine, the use of point discharge principle.
3. Tungsten needle to be extended when installing the weld head 5mm. Tungsten needle diameter 1mm

Steps:

1. Power on, turn on the power switch.
2. Adjust the power knob into coarse and fine. According to job requirements can be adjusted scale value
3. Tweezers clamped workpiece. Workpiece interface alignment tungsten needle (best distance for 5mm) can not contact the workpiece.
4. With the foot about a foot switch. (Feet away). Welding is completed.

Note:

1. Foot stepping on the foot switch is not a long time, step on right away, as long stepping switch, the machine is short-circuited, it will burn out the internal circuit
2. This machine is a precision please use care.
3. Flash of eye injury, do protective measures to use.
4. Foot switch is depressed, the hand Do not touch the metal parts of the tungsten needle and tweezers, otherwise there will be tingling.
5. Non-professionals do not overhaul, there are high pressure.